This 20 piece replacement bearing Kit contains the most popular bearings to fit our most popular Router bits., #6004, includes tool # 47723 (2), 47704 (3), 47702 (5), 47706 (5), 47701 (3), 47721 (2), 6004 20 piece ball bearing replacement Kit

We've created the smallest guide bearings in the industry!, If you've Often wanted to trim and shape small details in tight corners, but were disappointed by the scoring and burning left behind by solid pilot bits, we've got what you've been looking for: eight...

This series has a small chipbreaker therefore the quality of cut will improve. It will leave a smaller striated finish. For massive wood only, #46138, direction Up-cut, (D) diameter 3/4, (b) Cutting height 2-1/4, (D) shank 3/4, overall length (L) 4, flutes 3, CNC...

Use a Two-Flute bit where fine finish is paramount. Two flutes balance the bit, eliminating vibration that degrades the cut finish. Two cuts per revolution Yield a smooth surface, but feed rate is slightly reduced, #45452, diameter (D) 1-1/2, cutting height (B) 1-1/4, Shank...

Application: boring machines for shelving hardware, etc. Use with 10mm Shank drill adapters or bushings, #363035, (D) diameter: 3.5mm, (D) shank: 3.5mm, Overall Length (L): 55mm, rotation: right hand, type: brad point363035 solid carbide Drill Bit r/H 3.5mm dia x 55mm long x 3.5mm...

Cutting mortises for hinges and locks can be challenging; the mortise depth must be accurate for smooth operation and the edges must be sharp for a clean, professional installation. These mortise bits make hardware installation a snap. The large gullet between the two flutes...

This bit is a plunge-cutting straight router bit with a shank-mounted ball-bearing pilot. Ideal for template/pattern routing of parts, joints, internal cuts. The woodworking router bit can be used in handheld and table-mounted routers. With a handheld router, the pattern is on top of...

This bit is essentially a plunge-cutting straight with a shank-mounted ball-bearing pilot. Versatile, useful for template/pattern routing of parts, joints, internal cuts and can be used in handheld and table-mounted routers. The template is attached to the workpiece, and the pilot bearing rides along...

Use a Two-Flute bit where fine finish is paramount. Two flutes balance the bit, eliminating vibration that degrades the cut finish. Two cuts per revolution yield a smooth surface, but feed rate is slightly reduced. 45408 features a solid carbide cutting edge, #45408, diameter...

This bit is essentially a plunge-cutting straight with a shank-mounted ball-bearing pilot. Versatile, useful for template/pattern routing of parts, joints, internal cuts and can be used in handheld and table-mounted routers. The template is attached to the workpiece, and the pilot bearing rides along...

Amana Tool uses only the finest industrial quality precision ball bearings available. Bearings are double steel-shielded for extra rigidity and to inhibit dust. A special high-performance, high-temperature grease is used for maximum life., #47771, diameter (D) 1-1/8, application trs-310 (Timberline), B 1/4, D 8mm,...

The basic edge-forming bit, The Corner-Rounding bit rounds an edge to a given radius. The tool is shoulder to cut a fillet. The cut can be used to ease edges, as a simple profile, or as a part of a complex one. Also known...

#57106, diameter (D): 7/8, cut depth (a): 1/16, 1/8, 3/16, cutting Height (B): 1/2, shank (D): 1/2, overall length (L): 3-1/2, flutes: 2, 57106 carbide Tipped face Inlay solid surface 7/8 dia x 1/2 x 1/2 inch Shank

Must clamp work piece firmly to drill Press table, #55224, (B) Cutting height 1/2, (D) diameter 29/32, (D) shank 1/2, flutes 2, overall length (L) 2-1/2, D1 5/8, 55224 carbide Tipped Plug Cutter for drill Press 29/32 dia x 1/2 x 1/2 inch Shank

Must clamp work piece firmly to drill Press table, #55220, (B) Cutting Height 1/2, (D) Diameter 5/8, (D) shank 1/2, flutes 2, overall length (L) 2-1/2, D1 3/8, 55220 carbide Tipped Plug Cutter for drill Press 5/8 dia x 1/2 x 1/2 inch Shank

Cnc extender adapter made especially for 1/4" Shank router bits., #47640, (D) diameter 3/4, (D) diameter 3/4, overall length (L) 3-7/16, max RPM 18, 000, L1 1-1/4, L2 1-15/32, L3 5/16, D1 1/4, 47640 1/2 inch Shank CNC extension adapter for 1/4 inch Shank...

Industrial through-hole with V-point boring bits are coated with a non-stick coating for longer lasting cutting edge and tool life.Amana tool dowel drills are coated with a special polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated,...

Use a Two-Flute bit where fine finish is paramount. Two flutes balance the bit, eliminating vibration that degrades the cut finish. Two cuts per revolution yield a smooth surface, but feed rate is slightly reduced, #45436, diameter (D): 11/16, cutting Height (B): 1-1/4, Shank...

Use a Two-Flute bit where fine finish is paramount. Two flutes balance the bit, eliminating vibration that degrades the cut finish. Two cuts per revolution Yield a smooth surface, but feed rate is slightly reduced, #45434, diameter (D): 5/8, cutting height (B): 1-1/2, Shank...

For a super-smooth cut finish, Use a four-flute bit. Feed rate is reduced, and chipping is virtually eliminated, #57187, diameter (D): 3/4, cutting Height (B): 2, shank (D): 1/2, overall length (L): 4-3/4, replacement collar: 47740, replacement bearing: (Upper (2)) 47721 (lower) 47714, flutes:...