Use a Two-Flute bit where fine finish is paramount. Two flutes balance the bit, eliminating vibration that degrades the cut finish. Two cuts per revolution Yield a smooth surface, but feed rate is slightly reduced, #45450, diameter (D): 1-1/4, cutting height (B): 1-1/4, Shank...

Application: use with solid carbide metric brad point boring drills. For Quick insertion and removal from chuck. (Can be used on left or right hand drills.) drills sold separately, #364032, (D) diameter: 3.2mm, (D) shank: 10mm, Overall Length (L): 38mm, 364032 drill adapter 10mm...

Application: use with solid carbide metric brad point boring drills. For Quick insertion and removal from chuck. (Can be used on left or right hand drills.) drills sold separately, #364040, (D) diameter: 4mm, (D) shank: 10mm, Overall Length (L): 38mm, 364040 drill adapter 10mm...

Using the same quality standards as our regular steel bearings, these ultra-glide bearing assemblies feature satin-smooth Delrina sleeves. Delrin is an industrial synthetic plastic material similar to nylon, and will leave no marks on the material being cut. Applications include solid-surface materials such as...

Using the same quality standards as our regular steel bearings, these ultra-glide bearing assemblies feature satin-smooth Delrin sleeves. Delrin is an industrial synthetic plastic material similar to nylon, and will leave no marks on the material being cut. Applications include solid-surface materials such as...

Use a Two-Flute bit where fine finish is paramount. Two flutes balance the bit, eliminating vibration that degrades the cut finish. Two cuts per revolution yield a smooth surface, but feed rate is slightly reduced, #45433, diameter (D): 5/8, cutting Height (B): 2, shank...

Spiral-flute bits combine a shearing action in cutting with an auguring action in chip clearance. The shearing action yields an especially clean accurate cut while the auguring action clears chips from the cut. The ‘down-cut’ cuts from the surface down leaving a smooth edge...

Specially designed for speed and finish When working with solid hardwood. The combination of acute spiral flute Shear angles With face ground helix Yield High feed rates, fast plunge action, Quick direction changes, deep penetration and mirror finish. Recommended RPM 20, 000-21, 000, #46361,...

Two- and three-wing slotting Cutters are available individually. Use a two-wing Cutter for faster feed rates, three-wing cutters for better cut finish, #53200, diameter (D) 1-7/8, cutting height (B) 1/16, D1 5/16, # Wings 3, 53200 slotting cutter 3 Wing x 1-7/8 dia x...

This bit is essentially a plunge-cutting straight with a shank-mounted ball-bearing pilot. Versatile, useful for template/pattern routing of parts, joints, internal cuts and can be used in handheld and table-mounted routers. The template is attached to the workpiece, and the pilot bearing rides along...

Special unique carbide for longer lifetime in abrasive Material. Designed for CNC applications requiring high feed rates and a clean finish. Particularly suitable for double-sided melamine or laminated material, #46191, (D) diameter 1/2, (b) Cutting height 1-1/2, (D) shank 1/2, overall length (L) 4-1/16,...

To be used only on CNC machines and routers with automatic feeding. Produce super clean, smooth cuts especially in acrylic materials (Plexiglas Lucite) other plastics and wood. Bits are made according to strict tolerances from an exclusive carbide grade and polished to a mirror...

Must clamp work piece firmly to drill Press table, #55217, (B) Cutting height 1/2, (D) diameter 5/8, (D) shank 1/2, flutes 2, overall length (L) 2-1/2, D1 .335", 55217 carbide Tipped Plug Cutter for drill Press 5/8 dia x 1/2 x 1/2 inch Shank

Trim The edges of face frames flush with cabinet sides with this bit. At the same time, cut a decorative V-Groove to conceal the seam between the frame and the case., #47160, diameter (D) 5/8, cutting Height (B) 1, shank (D) 1/4, overall length...

The basic edge-forming bit, The Corner-Rounding bit rounds an edge to a given radius. The tool is shoulder to cut a fillet. The cut can be used to ease edges, as a simple profile, or as a part of a complex one. Also known...

#204032, (B) Cutting height: 35mm, (D) diameter: 3.2mm, (D) shank: 10mm, Overall Length (L): 70mm, rotation: right hand204032 solid carbide cutting edge brad point boring bit r/H 3.2mm dia x 70mm long x 10mm Shank

Industrial brad point boring bits are coated with a non-stick coating for longer lasting cutting edge and tool life.Amana tool dowel drills are coated with a special polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there...

Take on demanding tasks with TOUGH GRIP Screwdriving Bits. With select sizes redesigned to be up to 40X tougher for reduced bit breakage*, these bits can complete challenging jobs with ease. Featuring optimized geometry, the bits for driving T20-T40 fasteners provide tight fit ideal...

The MILWAUKEE SHOCKWAVE Impact Duty 15PC RED HELIX Titanium Drill Bit Set is engineered for extreme durability and long life. The QUAD EDGE tip delivers a precision start and features four cutting edges to create smaller chips for faster material removal and less heat...